Stix® Waterborne Bonding Primer
Canada's Biggest Paint Store
A premium-quality one-component coating specifically engineered to deliver outstanding performance and protection for the toughest high-traffic areas in busy commercial spaces. This unique product offers superior durability, cleanability and scuff resistance properties than traditional 2-component epoxies in the market, without the odour, pre-mixing, pot life and application difficulties related to these products. It will hold up to repeated cleaning and scrubbing without causing any permanent damage to the paint film. This outstanding product is available in matte, eggshell and pearl finishes.
This product can be applied to interior walls, ceilings, doors, trim, cabinets, paneling and related paintable surfaces. ODORLESS bonds to gloss enamels and varnishes, hardboard, glass and tile. Resistant to high pH surfaces (up to 12.5) including; plaster, poured concrete, concrete block, stucco and ‘hot’ joint/texture compounds. It seals porous surfaces so topcoats spread further and present accurate sheen and color. Blocks difficult stains from fire and smoke damage, water damage and nicotine.
Apply to interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, and similar painted surfaces that exhibit chalking, alligatoring and peeling. PEEL STOP seeps into these spaces and ‘glues’ them down, forming a tight bond that helps stop future peeling. The special formula of PEEL STOP penetrates and binds chalky residues; it acts as a flexible bridging primer to seal face checking and help prevent the finish coat from cracking, providing a sound surface
Primes, hides, seals, and sizes in one step. It’s mildew resistant and has excellent adhesion to all paintable surfaces. High hiding to cover colors and patterns and will seal “builders flat” latex paint. It’s compatible with all wallcovering adhesives and all wallcoverings. Shieldz resists rewetting for effective double-cutting and repositioning. It protects wallboard from damage when removing wallpaper and promotes easier strippability. It has virtually no odor with it’s water-base formula.
Zinsser ® B-I-N ® Shellac-Base Primer is a primersealer/stain killer/bond coat recommended for application to interior ceilings, walls, doors, trim, cabinets, furniture and related paintable surfaces. Exterior uses are limited to spot priming only. This product may be used to block water, grease, rust, smoke, asphalt, graffiti, and many other types of stains.
Zinsser® Cover Stain® Oil-Based Primer is an all purpose oil-based primer designed for interior or exterior applications where an oil-base primer is desired. CoverStain provides excellent penetration and flexibility and has excellent adhesion and stain blocking properties. CoverStain has excellent adhesion to dense, glossy surfaces such as enamel paints and varnishes, paneling, laminates, and ceramic tile without the need for sanding or deglossing.
There’s a reason Zinsser® Bulls Eye 1-2-3® Water-Base Primer is our most popular primer. This premium, whole-house primer-sealer provides outstanding performance indoors and out, with low odour, great flow and leveling and a flexible, acrylic formula. Great for sealing new wood, priming galvanized metal and blocking mild staining.
OLYMPIC RESCUE IT! Resurfacer + Sealant in One is designed for application on lightly worn concrete and structurally sound wood (decks, stairs, posts, railings, and more); retaining walls; as well as new concrete surfaces cured for 30 days and new wood. This 100% acrylic, high-performance coating conceals hairline cracks, helps prevent splinters and provides a safe, durable surface that resists fading and creates a mildew resistant coating. Ideal for decks, porches and sidewalks.
Flood Pro Series Solid Stain has and advanced formulation that protects wood from moisture and sun damage while adding a rich, opaque color. It is recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces. Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted.
A premium quality, quick-drying, urethane alkyd modified acrylic high sheen latex floor enamel. One coat covers most previously painted surfaces that are in fair to good condition. It’s great for residential or commercial applications where a premium high gloss quality finish is desired. For interior and exterior use on unpainted concrete (new or old) and previously finished wood or concrete floors. This product is also recommended for basements, porches, patios, breezeways, showrooms, and light industrial applications.
Saman Odorless Stains for Wood Floors are easy to use and environmentally friendly. No pre-stain or conditioner is required. With Saman’s unique formula you will need just one coat and it doesn’t cause wood grain raising nor does it leave any signs of overlapping marks.
Looking for a low VOC alternative? Old Masters Water-Based Wood Stain is a semitransparent stain that colors and enhances the beauty of bare wood surfaces. Its water-based formula allows easy application, fast drying and low odor. It is ideal for use on cabinets, furniture, doors, trim, crafts, floors and much more. Old Masters Water-Based Wood Stain is currently available in 10 ready-mixed stain colors.
Latex Base DRYLOK® Masonry Waterproofer is a low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, and foundation. No pre-mixing or pre-wetting necessary. Drylok is very low in odor and complies with all current VOC regulations. It can withstand 10 pounds of hydrostatic pressure with a breathable film that does not trap moisture in masonry.
A versatile, ultra-durable water-borne acrylic, Break-Through!, is formulated to bond to some of the most difficult substrates including fiberglass, laminate, and many plastics. The interior/exterior satin finish offers very fast dry and outstanding early block resistance for increased productivity with less down time. Break- Through! provides hardness similar to or better than standard alkyds with a low VOC formula, but maintains flexibility to endure extreme bends and deformation without cracking and peeling. Break-Through! is ideal for doors, windows, cabinets, shelving, hand rails, fixtures, trim, wood and concrete floors.
Top quality 100% acrylic water-based epoxy-fortified paint especially recommended for floors. It is an extremely adherent product with a non-skid satin finish for interior and exterior surfaces. It is stain and weather resistant.
PARA FloorGUARD is a top quality, low VOC (less than 100g/L), hybrid waterborne alkyd/polyurethane enamel porch and floor paint for interior and exterior surfaces. This high performance, super-adherent coating dries quickly to a hard durable gloss finish that provides superior wear, dirt and water resistance for protection from abrasion, foot traffic and weathering. It’s ideal for properly prepared wood and concrete porches, steps, and basement floors.
A top quality advanced low VOC (less than 50g/L) waterborne alkyd enamel for both interior and exterior surfaces. This high performance, durable coating is easy to apply and offers excellent self leveling and flow characteristics for a smooth semi-gloss or eggshell appearance on most surfaces. Apply on properly prepared wood, metal, drywall and masonry surfaces. This product is ideally suited for walls, doors, trim, cupboards, furniture and other high traffic interior and exterior areas.
A fast-set paint for marking traffic lanes on streets, highways, parking lots, warehouses and other areas where such marking
is required. Traffic beads may be dropped into this coating while wet to provide light reflecting markings.
Fire Retardant Paint expands and forms a thick cellular char blanket, called intumescence, when attacked by flame. This latex paint retards flame spread, minimizes smoke development, and applies like a conventional latex flat paint.
Cabinet Coat is the ultimate finish for refurbishing kitchen and bathroom cabinets, shelving, furniture, trim, and crown molding. It delivers an ultra-smooth, factory-like finish with long-lasting beauty. It also adheres to "hard-to-stick" surfaces, including polyurethane and varnishes, without using a primer.
Stix Waterborne Bonding Primer is a premium-quality, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.
REGAL Select Exterior High Build is a premium waterborne acrylic paint tinted on our proprietary Gennex colorant system. It offers a thick, high-build formula engineered for optimum hide and fewer coats. With easy application by brush or spray, this coating offers excellent flow and leveling and the superior performance you expect from the REGAL name for your exterior projects. Available in Flat, Low Lustre and Soft Gloss finishes.